Vehicle TPMS Information

Make:Mercedes
Model:CLS Class (Built after June 2005 and Built before August 2009)
Model Code:W219
Date of Manufacture: 2005 - 2009
OE Sensor Manufacturer:Continental
OE Sensor Number:

A0025408017
Sensor Frequency:

433 MHz

The following sensors are all compatible with: Mercedes CLS Class 2005-2009.

REMA TIPTOP AUSTRALIA Configurable and Programmable Sensors

5623990

433 MHz U-Pro Hybrid 2010 Clamp-In Sensor

Clamp-In 433MHz U-Pro™ - Hybrid Configurable TPMS Sensor. Requires a TPMS diagnostic tool to configure the sensor for the r... (more)

5623992

433 MHz U-Pro Hybrid 2010 Snap-In Sensor

Snap-In 433MHz U-Pro™ - Configurable TPMS Sensor. Requires a TPMS diagnostic tool to configure the sensor for the required ... (more)

5624128

Hybrid 2.0 Snap-In Dual-Frequency Sensor

U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)

5624130

Hybrid 2.0 Clamp-In Dual-Frequency Sensor

U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)

5624132

Hybrid 2.0 Dual Valve Dual-Frequency Sensor

U-Pro Hybrid 2.0 Sensor The only single SKU solution. A dual frequency, configurable and programmable TPMS sensor with dual valve... (more)

5624134

Hybrid 2.0 Black Clamp-In Dual-Frequency Sensor

U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)

Other Compatible Sensors

5624002

Alligator Sens.It Snap-In Sensor 433MHz

Alligator programmable Sens.It sensor 433Mhz. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.

5624000

Alligator Sens.It Clamp-In Sensor 433MHz

Alligator programmable Sens.It sensor 433Mhz. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.

Service parts for the VDO MB Clamp-In style sensor:

6-206B

Box Of 10 Replacement Clamp-In Valves for VDO MB

A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Screw, 1 Valve Cap and 1 Valve Core. ... (more)

You must be logged in to view relearn procedures.

Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.